# What should be tyre pressure in Jimny

**URL:** <https://forum.curbover.com/t/what-should-be-tyre-pressure-in-jimny/435>\
**Category:** General\
**Created:** [August 18, 2023, 5:04am UTC](https://forum.curbover.com/t/what-should-be-tyre-pressure-in-jimny/435 "2023-08-18T05:04:49Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![maverick](https://forum.curbover.com/letter_avatar_proxy/v4/letter/m/258eb7/32.png) [@maverick](https://forum.curbover.com/u/maverick)\
**Post date:** [August 18, 2023, 5:04am UTC](https://forum.curbover.com/t/what-should-be-tyre-pressure-in-jimny/435/1 "2023-08-18T05:04:49Z")

</div>

Hello everyone.  
As I mentioned, I upgraded my Jimny stock Tyres to Yokohama Geolander 215/75R 15. The dealer filled the tyres with nitrogen and tyre Pressure is 35 psi. I observed that I keep tyre pressure in ISuzu MUX at 30 psi and I am a long distance traveller. He says because of long pipe around 3 psi remains in pipe so effectively there is 32 psi in tyres. To me it is not logical. I stay at Manali, Himachal where these days roads are practically off roading type. How much should be tyre pressure?

---

<div class="post-metadata">

**Author:** ![\_Aj](https://forum.curbover.com/user_avatar/forum.curbover.com/_aj/32/59_2.png) [@\_Aj](https://forum.curbover.com/u/_Aj)\
**Post date:** [August 18, 2023, 6:13am UTC](https://forum.curbover.com/t/what-should-be-tyre-pressure-in-jimny/435/2 "2023-08-18T06:13:42Z")

</div>

Hey. Welcome to the forum. Keep it at 30. Jimny is a very light vehicle.

---

<div class="post-metadata">

**Author:** ![Traveler](https://forum.curbover.com/user_avatar/forum.curbover.com/traveler/32/1264_2.png) [@Traveler](https://forum.curbover.com/u/Traveler)\
**Post date:** [August 18, 2023, 12:04pm UTC](https://forum.curbover.com/t/what-should-be-tyre-pressure-in-jimny/435/3 "2023-08-18T12:04:13Z")

</div>

Stock tyre of 195/80 R15 recommended air pressure is 26 PSI as per MSIL.

Upgraded Tyres should either have the same or lower pressure, however on actual testing with 225/70 R15 Apollo Apterra AT2 Tyres I found the best balance of fuel economy and ride quality at 30 PSI.

Folks using 215/75 R15 Yokohama Geolandar AT G015 or Continental Cross Contact AT have reported that the car behaves good at either 29 or 30 PSI as well.

---

<div class="post-metadata">

**Author:** ![GYmSY](https://forum.curbover.com/letter_avatar_proxy/v4/letter/g/ed655f/32.png) [@GYmSY](https://forum.curbover.com/u/GYmSY)\
**Post date:** [July 31, 2024, 6:11am UTC](https://forum.curbover.com/t/what-should-be-tyre-pressure-in-jimny/435/4 "2024-07-31T06:11:02Z")

</div>

Thanks for this post.

I am a new user here and was actually searching for tyre pressure details for Apollo Apterra AT2 225/70/R15.

There are no details available online as far as I’ve researched and the Apollo Tyres website doesn’t shed much light.

I think you’re absolutely bang-on with the 30psi limit. I was sceptical if it was the right pressure or not, but could feel the tyres were performing just right at this tyre pressure.

Quick question - Do you think an increase is needed if there’s more load to carry?

Thanks!

---

<div class="post-metadata">

**Author:** ![Traveler](https://forum.curbover.com/user_avatar/forum.curbover.com/traveler/32/1264_2.png) [@Traveler](https://forum.curbover.com/u/Traveler)\
**Post date:** [July 31, 2024, 6:21am UTC](https://forum.curbover.com/t/what-should-be-tyre-pressure-in-jimny/435/5 "2024-07-31T06:21:22Z")

</div>

Welcome to CurbOver. I have never increased the pressure beyond 30 even with full load. It has been an year now and I have done three long expeditions with full load at 30 PSI without any issues.

On highways I get around 14 kmpl with full load at 30 PSi and speed between 80 and 90 kmph.

I dont drive beyond that speed.
